- Dieses Thema hat 6 Antworten und 2 Teilnehmer, und wurde zuletzt aktualisiert 27. Februar 2013 um 7:11 von admin.
- AutorBeiträge
- 25. Februar 2013 um 16:10 Uhr #2588don***Premium User***
- Beiträge 3
AnzeigeHi
I would like to make the Drachenfliege 3mm but cant see how to assemble it . Are there any instructions available ?Regards
Don25. Februar 2013 um 18:00 Uhr #2729adminAdmin- Beiträge 193
Hi,
maybe this picture can help you…
LG
26. Februar 2013 um 9:54 Uhr #2730don***Premium User***- Beiträge 3
Quote:Zitat von admin am 25.02.2013, 18:00
Hi,maybe this picture can help you…
LG
Hi Micheal and thanks for your reply.
In answer to your statement “ maybe this picture can help“ I am afraid not , in fact it adds to the confusion, let me explain why.The confusion starts when you first look at the model on the downloads page . It says its a Drachenfliege 3mm yet when you download the file its called a Drachenfliege 2mm. That was actually a good thing as I have lots of 2mm material and little 3mm
If you look at the picture it shows antennae ( antennen) , there are no antenna parts . Tha picture shows it has a long tail yet there is no part for the long tail , and the wings on the picture are totally different to those on the dxf file. Clearly the picture and the dxf file are for two different models .
Would it not be a good idea if when someone uploads a DXF file it included a separate sheet showing a picture of the parts but with letters or numbers next to each slot so to assemble it it would be a simplem case of matching the numbers , like A1 to A1 , A2 to A2. It would make life so much easier .
Is it possible for you to put me in contact with who ever it was that was kind enough to upload the file ? surely they would not upload a file without first trying it out to make sure it works so they would know how to build it
Regards
Don26. Februar 2013 um 10:26 Uhr #2731adminAdmin- Beiträge 193
Hey Don,
Ok mit der Dicke hast du Recht… ich habe es in 2mm geändert. War mein Fehler.
Bei dem Bild habe ich nur schnell auf den Kopf geachtet und dachte es wäre das richtige. Ein anderes Bild habe ich nicht.
Deine Idee ist natürlich super, aber das liegt natürlich auch hauptsächlich an euch Usern mir die Informationen und Bildern zu geben.
Bei einigen 3D Modellen gibt es schon so eine Bauanleitung wie du meinst.LG
26. Februar 2013 um 10:28 Uhr #2732don***Premium User***- Beiträge 3
AnzeigeQuote:Zitat von admin am 26.02.2013, 10:26
Hey Don,
Ok mit der Dicke hast du Recht… ich habe es in 2mm geändert. War mein Fehler.
Bei dem Bild habe ich nur schnell auf den Kopf geachtet und dachte es wäre das richtige. Ein anderes Bild habe ich nicht.
Deine Idee ist natürlich super, aber das liegt natürlich auch hauptsächlich an euch Usern mir die Informationen und Bildern zu geben.
Bei einigen 3D Modellen gibt es schon so eine Bauanleitung wie du meinst.LG
Its OK Micheal I have found the correct picture on another site. I will build it and work out where everything goes then upload the correct picture and hopefully a build sheet to help others
Don
26. Februar 2013 um 10:54 Uhr #2733adminAdmin- Beiträge 193
Das wäre super Don. Werde das Bild und die Anleitung dann direkt der Datei zuordnen.
Viel Erfolg beim bauen.
LG
27. Februar 2013 um 7:11 Uhr #2734adminAdmin- Beiträge 193
Vielen dank an Don. 😉
Hier habt ihr die Bauanleitung und ein Modell
Weitere Bilder findet ihr hier
https://www.dxf-downloads.de/user-bilder/Die Datei inkl. aller Bilder und Bauanleitung gibt es hier
https://www.dxf-downloads.de/suchen-2/?p=0&wpfb_s=drachenfliege&btn=SuchenNochmals vielen dank an Don für die super Arbeit.
- AutorBeiträge
- Du musst angemeldet sein, um auf dieses Thema antworten zu können.